Hot Tub Cover Lifters & Holders

An affordable side-mounted spa cover lifter and a light-duty version of the popular Covermate I.

Easy to install and simple to operate.

NB. Do not use for very large and heavy covers.

As allegedly the world’s most popular cover lifter, the CoverMate I is easy to install, even easier to use, and features a sleek, elegant look to complement any hot tub.

Fits virtually any spa up to 2.44m (8 ft) in width and requires just 18 inches of clearance behind spa.

This is an economical gas spring assisted cover lifter for effortless spa cover removal.

The Cover Rx is compatible with virtually any above-ground spa on the market today. The unique undermount installation plate allows the Rx to be installed on whatever side of your spa you choose and requires only 14" of clearance. Whether your spa is square, rectangular, octagonal, or round the Cover Rx will be a perfect fit and requires no drilling into your spa cabinet.

The CoverMate II is a good choice of cover lifter when clearance behind the spa is not too important.

The understyle bracket avoids having to drill into the side of the spa and this lifter stores the cover low down, but off the ground, for a less-obstructed view.

There is also a foot-bar to make lifting the cover easier.

Remove the cover without obscuring the view! Simply fold the cover in half and push it onto the sturdy aluminium bars, where it can rest without obstructing your view.

Keeps your cover off the ground and protected from damage while you relax.

This robust, hydraulic cover lifter utilises hydraulic rams to make lifting very easy, even with a large cover.

There is an an exclusive windlock system to avoid damage to the hydraulic shocks in windy conditions.

Support brackets for the device have be to mounted to the sides of the tub

Requires just six inches of clearance behind spa.

With it's simple design and great value, this cover lifter can be adjusted to fit most tubs, It comes with two hinges which attach to the bottom of the tub and stop chains to ensure the cover sits safely and securely to the back of the tub

Your hot tub must have at least 20 inches clearance at the back for this lifter to work correctly.

This pneumatically assisted cover lift is designed specifically for round and octagonal spas, but will also fit square or oblong hot tubs up to 8 ft (2.44 m), or any other shaped tub.

when in the open position, the CoverMate Freestyle positions the cover well away from the hot tub so that your use is not restricted in any way.