This is a demo store. No orders will be fulfilled.
AquaSPArkle Spa TA Plus - 1kg
AquaSPArkle Spa TA Plus increases the total alkalinity of hot tub water.
Maintaining the correct total alkalinity is the key to water balancing. If the TA is within an acceptable range the pH will be easy to balance and your sanitiser will work well.
When raising or lowering the Total Alkalinity the pH of the water will also be affected so be sure to check the pH 24 hours after any alkalinity treatment.
Use: AquaSPArkle TA Plus should be pre-dissolved in a small plastic container filled with spa water. Add a measured amount of the product (according to the table on the label) to warm spa water and carefully add the resulting solution to the spa whilst the pumps are turned 'on'.
You should always adjust your Total Alkalinity before you adjust the calcium hardness or pH.
AquaSPArkle Spa TA Plus is compatible with all spa sanitizers.
NB To reduce the total alkalinity use pH reducer.
|Active Ingredients||Sodium Bicarbonate|
AquaSPArkle Hot Tub Conditioner - 120ml£3.45
Aquasparkle Hot Tub Conditioner contains a blend of compounds to enhance the quality of water, reduce chlorine or bromine use, control scale and prevent biofilm formation in the pipework.
AquaSPArkle Spa Hardness Plus - 1kg£8.75
AquaSPArkle Spa Hardness Plus increases the calcium hardness of hot tub water.
AquaSPArkle Spa pH Minus - 1.5kg£7.80
AquaSPArkle pH Minus is a granular product used to reduce the pH and Total Alkalinity of hot tub water.